Category Archives: Gadget Man

Now kids can get back to BASIC with Fuze

FuzeKitShadBack in the 1980’s the UK was a melting pot of computer development, back then you couldn’t visit a friends’ house without seeing a them huddled behind a television slowly tapping out computer programs from magazines on their newly purchased home computers. While the USA basked in the glory of the Apple II and IBM PC, in the UK we had our feet firmly placed on the ground and our wallets closed tight. In the States people were paying $2,500 for their computers, far too much for us in the UK, being much more cautious with our hard earned money! Instead we made our own computers, the amazingly popular Sinclair ZX Spectrum, BBC Model B, Acorn Electron and Dragon 32. All of these were home grown products which took the country by storm for a few short years, much cheaper than the US counterparts at £140 and much more fun, well until the IBM PC was licensed to the likes of Dell, HP and AST and the prices started to tumble to more affordable prices.

BBC Model B
BBC Model B from the 1980’s

During this era of the ‘Home Computer’, a new industries sprung up with them. After weeks and months of typing program listings from magazines, the kids started to understand what was behind the code, how it worked and in most cases, how to improve it. Small ‘Software Houses’ appeared and began selling their games in the back pages of the computer magazines.

The BBC Model B was adopted by schools and immediately the national curriculum included ‘Computer Studies O’Level’. It was now possible to study computer programming, the UK was becoming a hotbed for coding and technology. Following school, students could continue their studies through college and university, it was exciting times for the UK computer industry.

Then suddenly without notice, the curriculum began to change again. The PC had become established in peoples’ homes and work, it seemed like everyone was running Windows and suddenly everything was easier. Instead of learning the basics of coding and programming, pupils were taught how to use Word Processors and Spreadsheets, how to put together school magazines using pre-made layouts and horrific 3d text effects. We had lost our way, we had forgotten how to encourage creativity and instead software was now just tools to build similar looking newsletters and faxes using ‘Wizards’ and animated paperclips.

The_RPi
Raspberry Pi computer with HDMI, Audio, USB and Network connectors

30 years on and quietly ‘Coding’ is back in the curriculum, the country has woken up to it’s lost opportunities and reintroduced the tools to help our children learn to create again. The Raspberry Pi computer was launched in 2012 and brought affordable computers to everyone. At a little under £20, you could buy a fully functioning credit card sized computer that could connect to your HD TV and could be programmed using any available language. It was a good start, but there was something missing.

T2_Hub_CloseThis is where Fuze comes in, by packaging the Raspberry Pi in a useable case (strangely evocative of the BBC Micro from the 80’s) with integrated keyboard and circuit prototyping board, the Fuze is being launched into schools as the ideal platform for Coding in the curriculum. The circuit board that sits on top of the Fuze allows for electronic design and testing that can be directly controlled from the included Fuze Basic programming language.

FUZE_SE_WEB5
A nod to the past is apparent with the Special Edition Fuze case

Included in the package is also a variety of transistors, LED’s and resistors packaged with a Programmers Reference Guide and Quick Start Projects book. Out of the box, it’s everything a budding programmer needs to get themselves on the path to Coding in the 21st Century. Further purchases can buy you a Robot Arm and other interesting projects and of course the system is based on the Raspberry Pi which has a mountain of components already available and the option to try out modern programming languages such as Perl, C++ and PHP.

Electronics_Logo
The Fuze I/O board makes simple prototyping electronics projects simple and safe

The Fuze is housed in a sheet aluminium case which is both durable and safe for young people to use and Fuze have improved upon the Raspberry Pi IO connecters by integrating the FUZE I/O board which greatly simplifies the Raspberry Pi by separating, and clearly labelling, the most common functions (Voltage, Ground, Digital IO and PWM) but goes further with the addition of four analogue in ports and one Out port (as the Raspberry Pi lacks analogue). It all may sound complicated, but in reality it has been designed to be accessible and easy to learn.

The Fuze starts at £69 and is available from a most computer stockists. For more information, visit www.fuze.co.uk.

 

Smartwatch Guide 2015

It’s certainly been a busy time for smart watches over the last 18 months and we are certainly seemingly spoilt for choice. We’re also not spoilt for price options either, there should be no reason that you shouldn’t be able to find a smartwatch to suit yours or a loved ones  style.

To help find the right watch, our friends at Mighty Skins have produced a handy infographic that details everything including price, compatibility, functionality and battery life.

You can download the info graphic, by clicking the image below or head over to Mighty Skins themselves.

Smartwatches-IG-2015_Mighty-Skins

On Our Doorstep – December 2015 – Great Scott! Is that a Hoverboard?

We’re not just on air and online, we’re also in print in this month’s On Our Doorstep, where we talk in depth about the latest so called ‘Hoverboard’ craze. There’s  lots of other interesting articles again this month, so click the link below and dig in.

The Gadget Man – Episode 78 – Fujifilm Finepix S9900W Bridge Camera

Matt Porter, the Gadget Man reviews the Fujifilm Finepix S9900W
Matt Porter, the Gadget Man reviews the Fujifilm Finepix S9900W

One of my favourite pastimes is photography, although very strictly on an amateur basis. I’ve have been very lucky indeed to have been able to test out a wide range of cameras from Fujifilm this year.

For the last few weeks, I’ve been testing the Fujifilm Finepix S9900W Bridge Camera. This is a true bridge camera and it ticks most of the boxes for me with it’s 50 times zoom lens and inclusion of viewfinder.  One thing I didn’t mention on the radio was it’s wireless compatibility which allows for almost instant uploading of photos and remote control from your smart phone.

Listen in to the stream and enjoy some of the photo’s I’ve been able to take with this lovely camera over the last few weeks.

Thank you to Jeannie at Fujifilm as ever!!!

The Gadget Man – Episode 75 – Self balancing two wheeled board

Hover boardThis week we chatted about the Self balancing two wheeled board’s that are currently very popular. You might know them as Hoverboards, Segways, Balance Boards, Monorovers etc. This is because the device is being manufactured by ‘copycat’ companies in the Far East and is being marketed under a whole host of different names in the UK alone.

It takes a bit of time to get used to riding the board, but once you get it, you are away. It’s great for smooth surfaces, not so good on bumpy ones.

Listen in to the audio stream to find out all about it. Lots of video shortly.

Thanks you a million times to Charles Claughton for the loan of the board, he is indeed a star!

 

The Gadget Man – Episode 74 – Fuze

Fuze reviewed by Matt Porter
Fuze reviewed by Matt Porter

This morning I chat to Rachel about the Fuze, which is “A programmable computer and electronics workstation, the FUZE, with FUZE BASIC, is an ideal platform for learning and teaching computational thinking and computer programming and provides a safe environment to experiment with simple electronics.”

It has been really interesting testing the Fuze and I will be reviewing here in more detail in the next few days, for now enjoy the audio.

 

 

The Gadget Man – Episode 73 – Halloween Ideas from Digital Dudz at Morph Suits

This morning I chatted to Mark about some Halloween and Christmas costume ideas from Morph Suits.

I was sent three different costumes ideas, the first was Cyclops Mask (available here) which aside from being a very well made full head mask, also had the added feature of fully animated eye which is achieved by slotting your mobile device into a special slot about the eye socket whilst running the Digital Dudz app for iPhone or Android.  When inserted, you can then centre the eye in its socket and pinch to zoom in and out to get the right size and positioning.

 

As you can see from the photos and video above, the effect is amazing and a little disturbing, but a fantastic use of technology all the same.

The second and third costume items where a clown t-shirt and Christmas jumper. The clown t-shirt has a hidden slot on the front which allows for the insertion of a mobile phone with the same app running. This gives another really spooky twist to Halloween costumes! The Christmas jumper allows the insertion of a mobile phone above the photo of a Gingerbread Man, again running the app, the Gingerbread man is slowly devoured!!

The Clown T-Shirt can be purchased by clicking this link and the Gingerbread Jumper at this link. You can browse the entire range of Morph Suit clothing here.

There’s still time to order your Halloween costumes in time for this weekend at http://www.morphsuits.co.uk/

 

The Gadget Man – Episode 72 – Internet Dating

This week the BBC are looking at dating later in life, so this morning I talk to Mark about Internet Dating and how it has evolved over the last 10 – 15 years. We discuss how to keep yourself safe online what you should look out for.

We also chatted about the new raft of apps available to help people connect up with each other online.

Danvers Baillieu from Hide My Ass was also due to chat, but was unable to due to a comms failure. I have also linked to my interview with him last week.

 

The Gadget Man – Episode 71.5 – The state of Internet security with Danvers Baillieu from Hide My Ass

Danvers Baillieu from Hide My Ass
Danvers Baillieu from Hide My Ass

We’re half way through Cyber Security Month and you can’t open a paper or turn on the TV without hearing about the latest high profile data leak. Security Issues are certainly something that we have covered in the past, so today I was delighted to have the opportunity to interview Danvers Baillieu, Chief Operating Officer of Hide My Ass!

Hide My Ass! or HMA are one of the leading firms of companies providing secure VPN connections to the internet and it was great to speak to Danvers to hear his view on current Internet security issues that are seemingly constantly in the news.

In the interview we covered internet security from both a company and personal point of view, how the governments should or shouldn’t involve themselves and what we should be looking out for in the future.

Listen in the stream and let me know what you think of the topics covered.

Thanks to Danvers for taking time out of his day and for Jocelyn from Cow PR for setting up the interview.

 

The Gadget Man – Episode 71 – Edifier MP211 Wireless Bluetooth Speaker with NFC + The Rolling Stones

This week I have been able to sample the audio delights of bluetooth streaming with the Edifier MP211 Wireless Bluetooth Speaker with NFC. This is a very nice wireless speaker solution for people looking for a mobile solution to playing their music quickly and easily.

The Gadget Man - Episode 71 - Edifier MP211 Wireless Bluetooth Speaker with NFC plus The Rolling Stones

 

 

 

 

 

Listen in to the stream to find out all about it, full review of the product coming up shortly.